F&P Airvo 3, User Manual, Page: 49 / 216

A - 46 | Airvo 3 - USER MANUAL
English
Pulse oximetry
Specifications are tabulated for the Airvo 3 and all compatible sensors unless otherwise stated.
Nonin:
Data update period <30 sec
Measurement wavelengths and Output Power* Red: 660 nanometers @ 0.8 mW max. avg.
Infrared: 910 nanometers @ 1.2 mW max avg. (using Nonin Purelight® sensor)
SpO
2
Accuracy (A
rms
**
)
No Motion
70 to 100%
Adults/Pediatrics*** Neonates
Reusable
8000AX Series:
800XJ Series:
8000SX Series:
8000R:
8000Q2: ± 2 digits
± 3 digits
± 2 digits
± 3 digits
± 3 digits N/A
N/A
N/A
N/A
N/A
Disposable
6000CX Series:
7000X Series: ± 2 digits
± 2 digits ± 3 digits
± 3 digits
Motion
Reusable
8000AX Series:
800XJ Series:
8000SX Series:
Low Perfusion****
± 2 digits
± 3 digits
± 3 digits
± 2 digits N/A
N/A
N/A
± 3 digits
Pulse Rate Accuracy Adults/Pediatrics*** Neonates
No Motion (18–300 BPM)
Reusable
8000AX Series:
800XJ Series:
8000SX Series:
8000R:
8000Q2: ± 3 digits
± 3 digits
± 3 digits
± 3 digits
± 3 digits N/A
N/A
N/A
N/A
N/A
Disposable
6000CX Series:
7000X Series: ± 3 digits
± 3 digits ± 3 digits
± 3 digits
Motion (40–240 BPM)
Reusable
8000AX Series:
800XJ Series:
8000SX Series:
Low Perfusion (40–240 BPM)****
± 5 digits
± 5 digits
± 5 digits
± 3 digits N/A
N/A
N/A
± 3 digits
* This information is especially useful for clinicians performing photodynamic therapy.
**
± 1 A
rms
represents approximately 68% of measurements.
*** Includes Infant patients
**** Does not apply to those sensors listed as N/A under the neonate column, 8000R and 8000Q2
Notes:
• SpO
2
accuracy testing is conducted during induced hypoxia studies on healthy, non-smoking, light-to-dark-skinned subjects during motion and
no-motion conditions in an independent research laboratory. The measured arterial hemoglobin saturation value (SpO
2
) of the sensors is
compared to arterial hemoglobin oxygen (SaO
2
) value, determined from blood samples with a laboratory co-oximeter. The accuracy of the
sensors in comparison to the co-oximeter samples measured over the SpO
2
range of 70–100%. Accuracy data is calculated using the root-mean-
squared (Arms value) for all subjects, per ISO 80601-2-61 formerly ISO 9919, Standard Specification for Pulse Oximeters for Accuracy.
• Pulse rate motion testing measures pulse rate accuracy with motion artifact simulation introduced by a pulse oximeter tester. This test
determines whether the oximeter meets the criteria of ISO 80601-2-61, formerly ISO 9919, for pulse rate during simulated movement, tremor, and
spike motions.
• Low perfusion testing uses an SpO
2
Simulator to provide a simulated pulse rate, with adjustable amplitude settings at various SpO
2
levels. The
module must maintain accuracy in accordance with ISO 80601-2-61, formerly ISO 9919, pulse rate and SpO
2
at the lowest obtainable pulse
amplitude (0.3% modulation).