F&P Airvo 3, User Manual, Page: 14 / 216

Airvo 3 - USER MANUAL | A - 11
English
3.3.5 System menu
The system menu provides access to additional settings and information. Tap to open
the system menu when the Home screen is displayed.
Menu item Description
Pulse Oximeter Alarms
and Settings
Configure the pulse oximetry settings including SpO
2
alarms.
Lock Screen The lock screen can prevent accidental settings changes.
Device Info
Displays the version, disinfection, and battery information.
System Settings
Change advanced Airvo 3 settings, limits and behaviors. Refer to the Airvo 3 Technical Manual for
more information.
3.3.6 Data and Graphs screen
The Data and Graphs screen displays current and previous measurements and settings for the current patient.
Tap to open the Data and Graphs screen when the Home screen is displayed. The values available depends on the active therapy
mode.
4. Preparing the Airvo 3
Review the safety information in section 2 before proceeding. Refer to appendices 1–3 for a list of consumables and accessories that have
been validated for use with the Airvo 3.
4.1 Equipment required
You will need:
• Airvo 3 attached to a mobile pole stand,
• clean and disinfected outlet elbow,
• bag of USP sterile/distilled water for inhalation (or equivalent).
If supplementary oxygen is prescribed for your patient, you will need either:
• high-pressure oxygen hoses to connect the Airvo 3 to the wall oxygen supply or an oxygen-bottle regulator, or
• low-pressure oxygen tubing to connect the Airvo 3 to a flowmeter.
Outlet elbows can be processed in two different ways:
Disinfection kit (900PT600)
For hospitals using the disinfection kit for reprocessing: A clean and disinfected outlet elbow will already be installed in the Airvo 3.
Remove the clean storage cover and/or the red disinfection tube before use.
Washer-disinfector
For hospitals using a washer-disinfector for reprocessing: obtain a clean and disinfected outlet elbow, e.g. from your Central Sterile
Services Department (CSSD) system.