F&P Airvo 3, User Manual, Page: 13 / 216

A - 10 | Airvo 3 - USER MANUAL
English
3.3.2 Message bar
The Message bar shows the current state of therapy delivery, confi rms settings changes and displays alarms.
Example messages are shown in the table below.
Message bar Description
Breathing gases are not being delivered to the patient.
Tap the Start button to begin therapy.
Breathing gases are being delivered.
Tap the Stop button, then confi rm action to return to standby mode.
Active alarms are displayed on top of other messages.
Tap the alarm for details or press to temporarily pause the alarm audio.
See section 7 for troubleshooting alarms.
3.3.3 Status indicators
The following icons may be displayed in the Message bar.
Icon Description
Audio pause
The Airvo 3 is being powered from the wall power supply
Status of the internal battery:
50% of the battery charge is remaining
Battery is charging and 50% of the charge is remaining
Battery is not charging properly
*
Battery is missing or faulty
*
Battery is due for replacement
*
Touch display is locked to prevent accidental changes
An Airvo 3 USB storage device is connected to one of the USB ports
*Check the battery is properly installed. Replace the battery if the problem persists.
3.3.4 Signal light
Signal light
The signal light fl ashes when any alarm is active. Its color indicates the highest priority
alarm that is active. See section 7 for troubleshooting alarms.