Extron electronics DXP DVI Pro, User Manual

Page: 84 / 139

$80$6)0ROAND$80($-)3ERIESs-ATRIX3OFTWARE 78
Setting the IP address
The
Matrix IP Address
field contains the IP address of the connected matrix switcher.
This value is encoded in the flash memory on the switcher.
6ALID)0ADDRESSESCONSISTOFFOURORDIGITNUMERICSUBlELDSSEPARATEDBYPERIODS
%ACHlELDCANBENUMBEREDFROMTHROUGH,EADINGZEROSUPTOTHREEDIGITSTOTAL
PERlELDAREOPTIONAL6ALUESOFANDABOVEAREINVALID
The default address is 192.168.254.254, but if this conflicts with other equipment, you
can change the IP address to any valid value.
%DITTHEADDRESSlELDASFOLLOWS
1. Click in the
Matrix IP Address
field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the address.
3. Press the <Tab> key on the keyboard or click in another field to exit the
Matrix IP
Address
field.
4. Click the
Take
button for the address change to take effect.
NOTE: %DITINGTHE
IP Address
FIELDWHILECONNECTEDVIA%THERNETCANIMMEDIATELY
disconnect your computer from the DXP. It is recommended that you connect
via RS-232 or RS-422 to edit this field.
Setting the Extron name or descriptor
The
Extron Name/Descriptor
field contains the name used as the “from” information
when the DXP switcher e-mails notification of its failed or repaired status. The default
name or descriptor shown in this field is a portion of your product name, followed by the
last six characters of the unit MAC address (for example
, $80$6)($-)!$
This descriptor can be changed to any valid name, up to 24 alphanumeric characters or
hyphens.
NOTE: The following characters are invalid or not recommended in the
Extron Name/
Descriptor
field:
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ ?
and
{
space
}.
%DITTHE
Extron Name/Descriptor
field as follows:
1. Click in the
Extron Name/Descriptor
field. The graphic cursor becomes a text
cursor.
2. %DITTHENAMEASDESIRED
3. Press the <Tab> key on the keyboard or click in another field to exit the
Extron Name/
Descriptor
field.
4. Click the
Take
button for the name change to take effect.
Setting the gateway IP address
The
Gateway IP Address
field identifies the IP address of the gateway to the mail server
to be used if the DXP switcher and the mail server are not on the same subnet (see
“
Setting the IP address ,” above, for the valid address format).
%DITTHISlELDASFOLLOWS
1. Click in the
Gateway IP Address
field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the address.
3. Press the <Tab> key on the keyboard or click in another field to exit the
Gateway IP
Address
field.