$80$6)0ROAND$80($-)3ERIESs/PERATION
25
4.
Select the desired input or outputs whose ties you wish to view by pressing the input
and output buttons.
NOTES:
s
7HENYOUPLACETHE$80IN
view-only
mode, all output buttons without
ties light. Likewise, when you press an output button with no ties, all other
output buttons without ties light.
s
To see all ties of the current configuration, press and release each input and
output button, one at a time, with the
6IDEO
and Audio buttons lit.
s
In view-only mode, you can view video and audio, video-only, or
audio-only ties. Pressing and releasing the
6IDEO
or Audio button toggles
each selection on and off.
s
7HENYOUVIEWVIDEOANDAUDIOTIESTHE6IDEO
button is lit green and
the Audio button is lit red. After you select an input or output, the output
buttons light as follows, indicating if audio is broken away:
s
Amber:
6IDEOANDAUDIOTIES
s
Green:
6IDEOONLYTIES
s
Red:
Audio only ties
s
After 30 seconds of front panel inactivity, the switcher exits view-only mode.
Example 4: Viewing Video and Audio, Audio-only, and Video-only Ties
In the following example, we view the video and audio, audio-only, and video-only ties in
the current configuration. The steps show the front panel indications that result from your
action.
NOTE:
This example assumes that you have performed examples 1, 2, and 3.
1.
0RESSANDRELEASETHE%SCBUTTON
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections
.
The button flashes once
.
Figure 30.
Clear All Selections
2.
0RESSANDRELEASETHE6IEWBUTTONTOPUTTHESWITCHERINVIEWONLYMODE4HE6IEW
button lights red.
