$80$6)0ROAND$80($-)3ERIESs/PERATION
32
Saving and Recalling Presets
The current configuration (0) can be saved as a preset in any one of 32 preset memory
addresses. Preset locations are assigned to the input buttons and (where necessary) output
BUTTONS5PTOPRESETSCANBESELECTEDFROMTHEFRONTPANELTOBEEITHERSAVEDOR
RETRIEVED7HENAPRESETISRETRIEVEDFROMMEMORYITBECOMESTHE
current configuration
.
NOTES:
s
Presets cannot be viewed from the front panel unless recalled as the current
configuration. Presets
can
be viewed using the Matrix Switchers Control
program (see the “
Matrix Software
” section, starting on page 70, for
more details).
s
The current configuration and all presets are stored in non-volatile memory.
7HENPOWERISREMOVEDANDRESTOREDTHECURRENTCONlGURATIONISSTILLACTIVE
and all presets are retained.
s
7HENAPRESETISRECALLEDITREPLACESTHECURRENTCONlGURATIONWHICHISLOST
unless it is also stored as a preset. The recalled preset overwrites all of the
current configuration ties in favor of the preset ties.
s
All models have 32 presets; however, only up to 16 presets (the number of
front panel buttons) can be selected from the front panel. Preset numbers
GREATERTHANCANBEACCESSEDUNDERSERIALPORTOR%THERNETCONTROL
Preset
1
Preset
5
Preset
2
Preset
3
Preset
8
Preset
6
Preset
7
Preset
4
Preset
9
Preset
13
Preset
10
Preset
11
Preset
16
Preset
14
Preset
15
Preset
12
INPUTS
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
OUTPUTS
NOTE:
Presets 17 through 32 are ava
i
lable v
i
a
RS-232/RS-422 and Ethernet control only
.
Figure 44.
Preset Locations for All DXP Models
Example 6: Saving a Preset
In the following example, the current configuration is saved as a preset. The steps show
the front panel indications that result from your action.
1.
0RESSANDRELEASETHE%SCBUTTON
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections
.
The button flashes once
.
Figure 45.
Clear All Selections
