$80$6)0ROAND$80($-)3ERIESs2EFERENCE)NFORMATION
125
125
3.
Locate the small corner notch on the clear lens cap, and slide the screwdriver between
the lens cap and the diffuser (see
b
in the illustration below).
4.
5SINGAROTATINGMOTIONOFTHESCREWDRIVERCAREFULLYPRYTHETWOPIECESAPARTSEE
c
in the illustration below).
5.
Lift out the transparent square label that you want to replace, being careful not to
DAMAGETHECIRCUITSBENEATHIT9OUMAYNEEDTOUSETHESMALLSCREWDRIVERTOGENTLY
pry the label out.
6.
Insert one of the new label you created in step
1
into the clear button cap, align the
white backing plate with the cap, and firmly snap it into place.
7.
'ENTLYBUTlRMLYPRESSTHEREASSEMBLEDBUTTONINTOPLACEONTHE$80FRONTPANEL
8.
Repeat steps
1
through
7
as needed to relabel other buttons.
2
3
TEXT
Separating the two-
piece button here at
the corner.
Pry the two
pieces apart.
Diffuser
Plunger
Base
Button Label
Clear Lens
Notch
Figure 116.
Replacing a Button Label
