$80$6)0ROAND$80($-)3ERIESs/PERATION
14
Secondary functions (
s
):
s
Select a global preset (see “
Saving and Recalling Presets
” on page 32).
s
Output 1 only:
7ITHTHE)NPUTBUTTONPLACESTHESWITCHERIN)/GROUPING
mode (see “
I/O Grouping
” on page 28).
s
Mute and unmute an output (see “
Muting and Unmuting Video and Audio
Outputs
” on page 34).
Configuration Port
c
Config port
— This RS-232 port is an alternative to the Remote RS232/RS422
connector on the DXP rear panel (see “
Rear Panels
” on page 6 for a description). The
port (RS-232 only) can be used for system configuration and control via SIS commands
or the control software. To connect to the Config port, see “
RS-232 and RS-422
Remote Connections
” on page 10.
Control Buttons
The following table summarizes the primary and secondary functions of the four
control buttons.
Primary Functions
ENTER
PRESET
VIEW
ESC
Action:
Save changes.
Select preset mode.
Select view mode. Cancel or escape.
Indication: Blink:
Save needed
Blink:
Save preset.
Lit:
Recall preset.
6IEWTHESELECTED
mode.
Flashes once.
Secondary Functions
I/O Grouping
Action/
indication:
Select group 1.
Select group 2.
Select group 3.
Select group 4.
Port
configuration
Action 1:
Select Configuration
Mode
Action 2/
indication:
Select 9600 baud.
Blink:
Selected
Select 19200 baud.
Blink:
Selected
Select 38400
baud.
Blink:
Selected
Select 115200
baud.
Blink:
Selected
Front panel
locks
Action:
7ITH6IDEOAND
Audio, select lock
mode 2 or toggle
between modes 0
and 2.
d
Enter button
4HE%NTERBUTTONDOESTHEFOLLOWING
Primary functions (
❏
):
❏
Saves changes that you make on the front panel.
❏
Indicates that a potential tie has been created but not saved.
❏
Indicates that a global preset has been selected to be saved or recalled but that
the preset action has not been accomplished.
