$80$6)0ROAND$80($-)3ERIESs2EFERENCE)NFORMATION
124
124
Rack Mounting Procedure
The DXP matrix switchers are housed in rack-mountable metal enclosures with mounting
flanges for standard 19-inch racks. If desired, mount the DXP switcher to a rack as follows:
1.
Insert the switcher into the rack, aligning the holes in the mounting flanges with those
in the rack.
2.
Secure the switcher to the rack using the supplied bolts.
Figure 115.
Rack Mounting the DXP to a 19-inch Rack
Button Labels
The next page provides strips of blank button labels. If desired, photocopy them or cut
them out of the guide, write button information in each button area as desired, and put
THEMINTHEWINDOWSFORTHESWITCHERINPUTOROUTPUTBUTTONS9OUCANALSOCREATELABELS
USINGTHE"UTTON,ABEL'ENERATORSOFTWARESEETHEh
Matrix Software
” section, starting
on page 70).
Replacing Button Labels
4HEBUTTONCAPSAREPRELABELEDBYDEFAULTFORYOURCONVENIENCE(OWEVERYOUCAN
replace them with the included additional printed button labels or with labels that you
print yourself.
The button assembly consists of a clear lens cap, the button label, and a white diffuser
(see
figure 116
on the next page). Remove the button assembly from the DXP as follows:
1.
-AKENEWLABELSUSINGEITHERTHEBLANKSATTHEENDOFTHISSECTIONORTHE"UTTON,ABEL
'ENERATORSOFTWARE#UTTHEMOUT
2.
Remove the button assembly by inserting a small, flat-bladed screwdriver, such as an
%XTRON4WEEKERBETWEENTHEBUTTONBASEANDTHEDIFFUSERTOGENTLYPRYTHEBUTTON
assembly off the button plunger, as shown in figure
115
, above.
