Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 163 / 512

Versatile Interface Modules for the Summit X650 Series Switches
Summit Family Switches Hardware Installation Guide
163
Versatile Interface Modules for the Summit X650
Series Switches
The back panel of the Summit X650 series switch has a replaceable VIM1 or VIM3 versatile interface
module. These modules provide dedicated high-speed stacking ports or Ethernet ports. For more
information about using the stacking ports, see
Chapter 5 .
The following VIMs are available for the Summit X650 series switches:
●
VIM1-10G8X module (this page)
●
VIM1-SummitStack module ( page 164
●
VIM1-SummitStack512 module ( page 164 )
●
VIM1-SummitStack256 module ( page 165 )
●
VIM3-40G4X module ( page 165 )
VIM1-10G8X Versatile Interface Module
The VIM1-10G8X versatile interface module ( Figure 120 ) provides eight cages for installed SFP or SFP+
optical modules. In addition, the VIM1-10G8X module is compatible with the SFP+ direct-attach passive
copper cable. For information about the supported optical modules, refer to the most recent version of
the
ExtremeXOS Hardware and Software Compatibility Matrix .
The VIM1-10G8X module also provides two high-performance stacking ports that allow you to combine
multiple units into a single SummitStack management entity. The stacking ports on the VIM1-10G8X
module are not shared with the front panel ports.
Ports 31 and 32 on the VIM1-10G8X module can be configured as alternate stacking ports in a
SummitStack configuration that uses the SummitStack-V feature. For more information about stacking
Summit family switches, see
Chapter 5 .
Figure 120: VIM1-10G8X Versatile Interface Module
Stacking ports
SH_087
25
25 27
26 28
3 0 3 1
3 0 3 2
26 27 28
29 3 0 3 1 3 2
LEDs
SFP/SFP+ ports