Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 24 / 512

Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
24
Summit X150-24t Switch
The front panel of the Summit X150-24t switch ( Figure 1 ) includes:
●
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
high-density copper connectivity
●
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X150 Series Switch LEDs” on
page 27 .
●
Serial console port used to connect a terminal and perform local management
Figure 1: Summit X150-24t Switch Front Panel
The rear panel of the Summit X150-24t switch ( Figure 2 ) includes:
●
Ethernet management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
See “EPS-160 External Power Module (with EPS-T)” on page 140 for more information. The
connecting redundant power supply cable is shipped with the EPS-160 unit.
●
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 2: Summit X150-24t Switch Rear Panel
1
2
Stack
SH_050B
10/100 Mbps ports
Console
port
Combination ports
SH_051
Management port
Power socket
External power
supply connection