Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 63 / 512

Summit X440 Series Switches
Summit Family Switches Hardware Installation Guide
63
Figure 40: Summit X440-24p Switch Rear Panel
Summit X440-24x Switch
The front panel of the Summit X440-24x switch ( Figure 41 ) includes:
●
24 unpopulated SFP ports (ports 1–24) that provide 24 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
“Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
●
Four autosensing 10/100/1000BASE-T ports (ports 21–24) that provide 4 Gbps of high-density
copper connectivity.
These ports are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
“Combination Ports and Failover” on page 22 .
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X440 Series Switch LEDs” on
page 77 .
●
Stack number indicator
Figure 41: Summit X440-24x Switch Front Panel
1 = AC power input connector
2 = Stacking ports
3 = Redundant power connector
3
SH_2 66
2
1
X
4 5 6
3 2 1
1 = Ethernet management port
2 = SFP ports
3 = 10/100/1000BASE-T ports 4 = Stack number indicator
5 = Console port
6 = Combination ports