Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 160 / 512

Chapter 3: Summit Option Cards and Versatile Interface Modules
Summit Family Switches Hardware Installation Guide
160
Summit XGM2-2xn Option Card
The Summit XGM2-2xn option card allows you to add one or two 10-gigabit XENPAK modules to the
following switches:
●
Summit X350 series switch, running ExtremeXOS 12.1.2 (or later)
Summit X350 series switches do not support the LW XENPAK module in the XGM2-2xn card.
●
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
● Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
● Summit X450e-24t switch, running ExtremeXOS 12.5.1 (or later)
●
Summit X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
Figure 118 shows the Summit XGM2-2xn option card.
Figure 118: Summit XGM2-2xn Option Card
In Summit X450a and X450e series switches, the ports on the XGM2-2xn option card can be configured
as alternate stacking ports in a SummitStack configuration that uses the SummitStack-V feature. For
more information about stacking Summit family switches, see
Chapter 5 .
For current information about compatible XENPAK modules and the minimum required software, refer
to the most recent version of the
ExtremeXOS Hardware and Software Compatibility Matrix .
For information about XENPAK modules, refer to the Extreme Networks Pluggable Interface Modules
Installation Guide.
NOTE
Standards-based CX-4 XENPAKs are also recognized by ExtremeXOS; contact your CX-4 module vendor
to obtain these.
SH_010