Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 170 / 512

Chapter 3: Summit Option Cards and Versatile Interface Modules
Summit Family Switches Hardware Installation Guide
170
Figure 131: XGM3S-2sf Option Card
XGM3S-2xf Port Option Card
The XGM3S-2xf option card ( Figure 132 ) allows you to add one or two 10-Gigabit XFP optical ports
to Slot A on the rear panel of the Summit X460 series switch. These ports support synchronous
Ethernet (Sync-E).
Figure 132: XGM3S-2xf Option Card
Summit X460 Series Stacking Modules
Summit X460 series stacking modules allow you to add two high-performance SummitStack ports to
slot B on the rear panel of a Summit X460 series switch. These ports allow you to combine multiple
units into a single SummitStack management entity, using stacking cables that are available from
Extreme Networks.
Two stacking modules are available for the Summit X460 series switches ( Figure 133 ):
●
SummitStack stacking module
Provides two integrated 20-Gbps bidirectional stacking ports for stacking connections using Extreme
Networks SummitStack cables.
●
SummitStack-V80 stacking module
Provides two unpopulated cages for QSFP+ optical modules or QSFP+ compatible active or passive
cables. These ports support 20-Gbps bidirectional stacking connections.
1
2
1 = SFP+ ports
2 = LEDs
CSR_023 1
2 2
1 = XFP ports
2 = LEDs