Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 222 / 512

Chapter 5: Building a SummitStack Configuration
Summit Family Switches Hardware Installation Guide
222
To connect a SummitStack 128G/20G cable:
1 Connect the 128-Gbps connector to the VIM1-SummitStack256 module as follows:
a Holding the cable connector with the release tab on top, align the connector with the stacking
port on the VIM1 module in the Summit X650 series switch (
Figure 161 ).
Figure 161: Connecting the 128G Connector
b Firmly press the cable connector into the stacking port until the spring latch on top of the
connector clicks into place.
2
Connect the 20G connector as follows:
a Align the cable connector with the stacking port connector on the back of the switch ( Figure 162 ).
b Firmly press the cable connector into place on the mating stacking port connector.
c Align and tighten the retaining screws on the cable connector.
Figure 162: Connecting the 20G Connector
SH_149
ES4K037