Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 151 / 512

Summit Replaceable Internal Power Supplies
Summit Family Switches Hardware Installation Guide
151
Summit Replaceable Internal Power Supplies
The Summit X460, X480, X650, and X670 series switches have two bays for installing one or two
Extreme Networks AC or DC power supplies. In a redundant power configuration, both power
supplies are fully fault-tolerant and load-sharing. You can remove one power supply without
interrupting switch operation.
Specific switch series and models are compatible with different power supply models, as shown
in
Table 47 .
NOTE
An AC power input cord is not provided with a Summit AC power supply. You can order an appropriate
cord from Extreme Networks or from your local supplier. The power cord must meet the requirements listed in
“Power Cord Requirements for AC-Powered Switches and AC Power Supplies” on page 500 .
Table 47: Summit Replaceable Internal Power Supply Compatibility
Power Supply Model
Summit Switch Model
300 W AC
(10930)
300 W DC
(10933)
300 W DC
(10934A)
450 W AC
(10917)
450 W DC
(10918) 550 W AC-FB
(10925)
550 W DC-FB
(10926) 550 W AC-BF
(10927)
550 W DC-BF
(10928)
750 W AC
(10931)
850 W AC
(10914)
850 W DC
(10915)
Summit X460-24t
Summit X460-48t
Summit X460-24x
Summit X460-48x
Yes
Summit X460-24p
Summit X460-48p
Yes
Summit X480 series Yes
Summit X650 series* Yes*
Summit X670-48x-FB
Summit X670V-48x-FB
Yes Yes
Summit X670-48x-BF
Summit X670V-48x-BF
Yes
* Extreme networks does not recommend combining an AC and DC power supply in the same Summit X650
series switch.