Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 66 / 512

Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
66
Figure 44: Summit X440-24t-10G Switch Rear Panel
Summit X440-24p-10G Switch
The front panel of the Summit X440-24p-10G switch ( Figure 45 ) includes:
●
Twenty-four fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–24). In addition to 24 Gbps
of high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
●
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
“Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
●
Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X440 Series Switch LEDs” on
page 77 .
Figure 45: Summit X440-24p-10G Switch Front Panel
1
SH_2 84
2
1 = AC power input connector
2 - Redundant power connector
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
3 = SFP ports
4 = Stack number 5 = Console port
6 = Combination ports
7 = SFP+ ports
SH_2 8 2
4 5
3
2 1
7 6