Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 74 / 512

Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
74
The rear panel of the Summit X440-48p switch ( Figure 54 ) includes:
●
Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module. See “Installing an
EPS-C2 Chassis” on page 322 for more information.
●
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 54: Summit X440-48p Switch Rear Panel
Summit X440-48t-10G Switch
The front panel of the Summit X440-48t-10G switch ( Figure 55 ) includes:
●
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
high-density copper connectivity
●
Two unpopulated SFP ports (ports 47 and 48) that provide 2 Gbps of fiber connectivity. The SFP
ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 47 and 48 are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
“Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
●
Two unpopulated SFP+ ports (ports 49 and 50) that provide 20 Gbps of fiber connectivity
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X440 Series Switch LEDs” on
page 77 .
1
SH_275
2 3
1 = AC power input connector
2 = Stacking ports
3 = Redundant power connector