Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 65 / 512

Summit X440 Series Switches
Summit Family Switches Hardware Installation Guide
65
Summit X440-24t-10G Switch
The front panel of the Summit X440-24t-10G switch ( Figure 43 ) includes:
●
Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
high-density copper connectivity
●
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
“Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
●
Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X440 Series Switch LEDs” on
page 77 .
Figure 43: Summit X440-24t-10G Switch Front Panel
The rear panel of the Summit X440-24t-10G switch ( Figure 44 ) includes:
●
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See
“Installing an EPS-C2 Chassis” on page 322 for more information.
●
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
SH_2 8 3
4 5
2 1
7 6
3
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
3 = SFP ports 4 = Stack number indicator
5 = Console port
6 = Combination ports
7 = SFP+ ports