Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 37 / 512

Summit X250e Series Switches
Summit Family Switches Hardware Installation Guide
37
Summit X250e-48t Switch
The front panel of the Summit X250e-48t switch ( Figure 17 ) includes:
●
Forty-eight fixed autosensing 10/100BASE-T ports (ports 1–48) that provide 4.8 Gbps of high-density
copper connectivity
●
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 22 .
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide .
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs” on
page 42 .
●
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
Figure 17: Summit X250e-48t Switch Front Panel
The rear panel of the Summit X250e-48t switch ( Figure 18 ) includes:
●
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
The connecting redundant power supply cable is shipped with the EPS-160 unit. See “EPS-160
External Power Module (with EPS-T)” on page 140 for more information.
●
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 18: Summit X250e-48t Switch Rear Panel
SH_044B
10/100 Mbps ports Console
port
Combination ports
Stack number indicator
SH_045
Stacking ports
Management port
Power socket
External power
supply connection