Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 23 / 512

Summit X150 Series Switches
Summit Family Switches Hardware Installation Guide
23
Summit X150 Series Switches
The Summit X150 series switches provide 24 or 48 fixed 10/100BASE-T Ethernet ports that deliver
high-density copper connectivity at 2.4 Gbps or 4.8 Gbps. Models are available with PoE and without
PoE. Each Summit X150 series switch has two combination ports that provide 10/100/1000 BASE-T or
SFP connectivity for 2 Gbps of copper or fiber connectivity. A serial console port on the front panel
allows you to connect a terminal and perform local management. On the back of the switch, an Ethernet
management port can be used to connect the system to a parallel management network for
administration. Alternatively, you can use an Ethernet cable to connect this port directly to a laptop to
view and locally manage the switch configurations.
The rear panel of the switch provides an AC power input socket and a redundant power connector. The
internal power supply operates from 100 VAC to 240 VAC. The switch automatically adjusts to the
supply voltage. The redundant power connector allows you to connect the switch to the EPS-160 or
EPS-500 external power supply. When a compatible external power supply is used with the Summit
X150 series switch, the internal and external power supplies are fully fault tolerant and load-sharing.
If one power supply fails, the other power supply will provide sufficient power to operate the switch.
The Summit X150e series switches include the following switch models:
●
Summit X150-24t switch ( page 24 )
●
Summit X150-24t-TAA switch
●
Summit X150-24p switch ( page 25 )
●
Summit X150-24p-TAA switch
●
Summit X150-48tswitch ( page 26 )
●
Summit X150-48t-TAA switch
NOTE
In the descriptions that follow, references to a Summit X150 series model number also apply to the
equivalent TAA-compliant switch version
.