Extreme Networks Summit X150 Series, Hardware Installation Manual

Page: 133 / 512

Summit X750 Series Switches
Summit Family Switches Hardware Installation Guide
133
Summit X750-32q Switch
The front panel of the Summit X750-32q switch ( Figure 111 ) includes:
●
32 40-Gigabit Ethernet ports capable of supporting passive copper QSFP+, and active fiber QSFP+.
With quad fan out SFP+ cables, 24 of the 32 ports can each be divided into four 10-gigabit data lanes
for a total of 104 10-Gigabit ports. Groups of two or four ports are configurable to be stacking ports.
For information about QSFP+ optical modules, see the Extreme Networks Pluggable Interface Modules
Installation Guide .
For information about stacking, see Chapter 5, “Building a SummitStack Configuration”
●
10/100/1000-Mbps management port
●
USB port for access to external storage
●
RJ-45 RS-232c serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X750 Series Switch LEDs” on
page 134 .
●
Stack number indicator
Figure 111: Summit X750-32q Front Panel
The rear panel of the Summit X750-32q switch ( Figure 112 ) includes:
●
Five replaceable fan modules
●
Two power supply bays for either AC or DC power supplies (see “Summit 550-Watt AC and DC
Power Supplies” on page 153 )
● Two mini-BNC connectors labeled OUT for connecting a Building Integrated Timing Supply (BITS)
or GPS timing source.
- 1 PPS frame output
- 10 MHz output
9 17 25 33 41 49 51 53 61 69 77 85 93 101 103 12 20 28 36 44 56 64 72 80 88 96
45
50 52
57 65 73 81 89 97
102 104
46 58 66 74 82 90 98 47 59 67 75 83 91 99 48 60 68 76 84 92 100
1
3
4
2 5
6
1 = USB port
2 = Stack number indicator
3 = Management port 4 = 40G/10G QSFP+ Ethernet ports
5 = Console port
6 = Stacking ports