manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 124

114

Setting Up Your Printer on a Network

About the Shared Printer

This section describes how to share the printer on a standard 
Windows network.

The computers on a network can share the printer that is directly 
connected to one of them. The computer that is directly connected 
to the printer is the printer server, and the other computers are 
the clients which need permission to share the printer with the 
printer server. The clients share the printer via the printer server.

According to the versions of Windows OS and your access right 
on a network, perform the appropriate settings of the printer 
server and clients.

Setting the printer server

❏

For Windows Me/98/95, see “Setting Up Your Printer as a 
Shared Printer” on page 115

❏

For Windows XP/2000/NT 4.0, see “Using an Additional 
Driver” on page 117 

Setting the clients

❏

For Windows Me/98/95, see “With Windows Me/98/95” on 
page 124

❏

For Windows XP/2000, see “With Windows XP/2000” on 
page 125

❏

For Windows NT 4.0, see “With Windows NT 4.0” on page 129

Note:

❏

When sharing the printer, be sure to set the EPSON Status Monitor 
3 so that the shared printer can be monitored on the printer server. 
See “Setting Monitoring Preferences” on page 96.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands