manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 266

256

Maintenance and Transportation

Replacing Consumable Products

Messages on the LCD panel and in EPSON Status Monitor 3 will 
inform you when it is time to replaces the printer’s consumable 
products.

Precautions during replacement

Keep the following in mind when replacing consumable 
products.

❏

Provide enough space for the replacement procedure. You 
will have to open some parts (such as the front cover) of the 
printer when you are replacing consumables.

❏

Do not install used consumable products into the printer.

w

Warning:

❏

Be careful not to touch the fuser, which is marked 

CAUTION 

HIGH TEMPERATURE

, or the surrounding areas. If the 

printer has been in use, the fuser and the surrounding areas 
may be very hot.

❏

Do not dispose of used consumable products in fire, as they 
may explode and cause injury. Dispose of them according to 
local regulations.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands