manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 110

100

Using the Printer Software with Windows

Setting for the USB Connection

The USB interface that comes with your printer complies with 
Microsoft Plug and Play (PnP) USB specifications.

Note:
Only PC systems equipped with a USB connector and running 
Windows XP, Me, 98, and 2000 support the USB interface.

1. Click 

Start

, point to 

Settings

, then click 

Printers

.

2. Right-click the 

EPSON AL-C4000 Advanced

 icon, and click 

Properties

 on the menu that appears.

3. Click the 

Details

 tab. In Windows XP or 2000, click the 

Port

 

tab.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands