manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 84

74

Using the Printer Software with Windows

4. Click the 

Printer’s HDD 

button, then enter the registered form 

name. If you need the list of the registered form data, click 

Print

 

List

 to print it and confirm the form name.

5. Choose 

To Back

 or 

To Front

 to print the form data as 

background or foreground of the document.

6. Click 

OK

 to print data.

Delete the form overlay data in the Hard Disk Drive

Only a network administrator using Windows XP, 2000 or NT 4.0 
is allowed to delete or edit the form overlay data in the optional 
Hard Disk Drive. Follow these steps to delete.

1. Login as an administrator to Windows XP, 2000 or NT 4.0.

2. To access the printer driver from Windows, click 

Start

, point 

to 

Settings

, and click 

Printers

. Next, right-click the 

EPSON 

AL-C4000 Advanced

 icon and click 

Properties

. 

3. Click the 

Optional Settings 

tab.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands