Epson AcuLaser C4000 Owner'S Manual Download Page 40

Page: 40 / 420

Paper Handling

2. Load a stack of the desired media with the printable surface

facing down, then slide the guides against the sides of the
stack to get a snug fit.

3. Select the Paper Source and Paper Size settings that match the

loaded media by using the printer driver or the printer’s
control panel.

Note:
To print on the back side of previously printed paper, use the MP tray.
The duplex unit cannot be used for this purpose.

Standard and optional lower cassettes

The paper-loading procedure is the same for the standard lower
cassette and the optional Large Capacity Paper Unit.

In addition to plain paper, you can also use special media such as
EPSON Color Laser Paper in the lower cassettes.

Note:

❏

Use the included paper size labels to identify the size of paper being
used in the cassettes.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4000

Reviews:

Related manuals for AcuLaser C4000

Brands by name

Popular brands

Epson AcuLaser C4000, Owner'S Manual

Search results

Summary of Contents for AcuLaser C4000

Reviews:

Related manuals for AcuLaser C4000

Brands by name

Popular brands