manualshive.com logo in svg

Epson AcuLaser C4000, Owner'S Manual

Share
Download
Epson AcuLaser C4000 Owner'S Manual Download Page 134

124

Setting Up Your Printer on a Network

With Windows Me/98/95

Follow these steps to set Windows Me/98/95 clients:

1. Click 

Start

, point to

 Settings

, and click 

Printers

.

2. Double-click the 

Add Printer 

icon, then click Next.

3. Select 

Network printer

, then click 

Next

.

4. Click 

Browse

, and the Browse for Printer dialog box appears.

Note:
You can also type “

\\(the name of the computer that is 

locally connected to the shared printer)\(the shared 
printer’s name)

” in Network path or queue name.

5. Click the computer or server that is connected to the shared 

printer, and the name of the shared printer. Then click 

OK

.

Note:
The name of the shared printer may be changed by the computer or 
server that is connected to the shared printer. To make sure of the 
name of the shared printer, ask the administrator of the network.

6. Click 

Next

.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands