Epson 6200L - EPL B/W Laser Printer Reference Manual Download Page 389

Page: 389 / 513

372

Troubleshooting

3. Gently pull out any sheets that have fed part way into the

printer.

4. Close the output tray, and open the printer’s front cover.

5. Remove any pieces of paper that may have torn off or are

remaining in the printer, and then close the front cover.

Note:
If necessary, take out the developer cartridge and remove any paper
left in the paper feed path. Then reinsert the cartridge.

6. Tap the edges of the paper stack on a flat surface and carefully

reload it into the MP tray.

Note:
Do not reload curled or wrinkled sheets.

7. Reinstall the MP tray cover.

8. Open the printer’s front cover again, and then close it until it

clicks shut. The jammed page’s print data is automatically
reprinted.

Summary of Contents for 6200L - EPL B/W Laser Printer


































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews:

Epson 6200L - EPL B/W Laser Printer, Reference Manual, Page: 389 / 513

Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews: