manualshive.com logo in svg

Epson 6200L - EPL B/W Laser Printer, Reference Manual, Page: 323 / 513

Share
Download
Epson 6200L - EPL B/W Laser Printer Reference Manual Download Page 323

306

Replacing Consumable Products

Precautions During Replacement

Always observe the following handling precautions when 
replacing consumable products:

❏

Provide enough space for the replacement procedure. You 
will have to open some parts (such as the printer cover) of the 
printer when you are replacing consumables.

❏

Do not install used consumable products into the printer.

w

Warning:

❏

Be careful not to touch the fuser, which is marked 

CAUTION 

Hot Surface

, or the surrounding areas. If the printer has 

been in use, the fuser and surrounding areas may be very hot.

❏

Do not dispose of used consumable products in fire, as they 
may explode and cause injury. Dispose of them according to 
local regulations.

Developer Cartridge

The two types of developer cartridges are as follows:

❏

The developer cartridge (S050166) that prints up to 6,000 
pages. This cartridge can only be used with the EPL-6200.

❏

The developer cartridge (S050167) that prints up to 3,000 
pages.

The developer cartridge included with the EPL-6200 prints up to 
3,000 pages, while the one included with the EPL-6200L prints up 
to 1,500 pages.

Summary of Contents for 6200L - EPL B/W Laser Printer


































































































































































































































































































































































































































































































































Reviews:

No comments