manualshive.com logo in svg

Epson 6200L - EPL B/W Laser Printer, Reference Manual, Page: 275 / 513

Share
Download
Epson 6200L - EPL B/W Laser Printer Reference Manual Download Page 275

258

Using the Remote Control Panel Utility (EPL-6200 only)

Dot Correction

This setting is relevant to 1200 dpi printing only. When set to 

On

, 

the printing pattern of 1-dot lines is automatically corrected to 
improve appearance.

More button

Click 

More

 on the Remote Control Panel screen and the following 

dialog box appears:

Top Offset

Allows you to adjust the vertical printing position on the page. 
The setting is in millimeters. You can move the printing position 
by 0.5 mm increments from the top edge (the parameters are from 
-99 to 99).

Left Offset

Allows you to adjust the horizontal printing position on the page. 
The setting is in millimeters. You can move the printing position 
in 0.5 mm increments from the left edge (the parameters are from 
-99 to 99).

Summary of Contents for 6200L - EPL B/W Laser Printer


































































































































































































































































































































































































































































































































Reviews:

No comments