Epson 6200L - EPL B/W Laser Printer Reference Manual Download Page 199

Page: 199 / 513

182

Using the Printer Driver For Macintosh

1. Icon/Message:

Shows the printer status.

2. Printer image:

The image at the upper left shows the
printer status graphically.

3. Text box:

The text box next to the printer image
displays the current status of the printer.
When a problem occurs, the most probable
solution is displayed.

Cancel Printing

button (EPL-6200L
only):

Clicking this button cancels your current
print job that the printer is printing.

button:

Closes the dialog box.

6. Paper:

(EPL-6200)

Displays the paper sources, paper size and
the approximate amount of paper
remaining in each paper source.

Paper:
(EPL-6200L)

Displays the paper size.

7. Toner:

Indicates the amount of remaining toner.
The toner icon flashes if toner is low or out.

8. Photoconductor

Unit life:

Indicates the remaining functional life of
the photoconductor unit.

Summary of Contents for 6200L - EPL B/W Laser Printer


































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews:

Epson 6200L - EPL B/W Laser Printer, Reference Manual, Page: 199 / 513

Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews: