Epson 6200L - EPL B/W Laser Printer Reference Manual Download Page 197

Page: 197 / 513

180

Using the Printer Driver For Macintosh

❏

If you change the printer driver in the Chooser while the spool file
is printing in the background, output to the printer may be
disrupted.

❏

Printer and consumable products status information appears in the
status window only if the Chooser is acquiring status normally.

Mac OS X users

Follow these steps to access the EPSON Status Monitor 3:

1. Click

in the File menu of any application. The Print dialog

box appears.

2. Select

Utilities

in the list where Copies & Pages is displayed.

3. Click your printer’s icon.

Getting printer status details

You can monitor printer status and obtain information on
consumable products using the EPSON Status Monitor 3 dialog
box.

Summary of Contents for 6200L - EPL B/W Laser Printer


































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews:

Epson 6200L - EPL B/W Laser Printer, Reference Manual, Page: 197 / 513

Search results

Summary of Contents for 6200L - EPL B/W Laser Printer

Reviews: