epiphan Pearl Mini, User Manual

Page: 362 / 447

Pearl Mini User Guide Configure AFU to SCP client parameters
Table 59 SCP Automatic Upload Configuration Parameters
Name Description
Server address The IP address (or fully qualified domain name) of the destination server.
Server port The SCP port used by the target server. Standard port is 22.
Login Username for the SCP server.
Password Password for the SCP user.
Prerequisites
l
Channels and recorders are already added for AFU, see Choose files to include in AFU
l
AFU is enabled and the parameters configured, see Enable AFU and set parameters .
To configure upload to an SCP client:
1. From the Automatic File Upload configuration page, select SCP Client as the protocol transfer type.
2. Specify the target Server address . If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP ), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the Server Port used for the destination SCP server. The standard port is 22.
4. Enter the SCP account username in the Login field.
5. Enter the SCP account password in the Password field; the characters are masked with dots.
(Alternatively you can choose to use a private key instead of a password for authentication.)
350