epiphan Pearl Mini User Manual Download Page 17

Page: 17 / 447

Pearl Mini User Guide

Front and back view Pearl Mini

Do not insert objects in to the two, pin-sized holes that are located beside the LEDs.

Table 2

Pearl Mini back panel descriptions

Label Name

Description

Lock

Allows Pearl Mini to be locked to a desk or surface using a laptop lock
cable.

Power button

Press to toggle Pearl Mini on and off.

If a software shutdown is performed when the toggle
switch is in the on position, double press the power
button to turn on Pearl Mini.

Power jack

Plug the power supply in here. The port requires a 12 V DC power
source (center-positive). Always use the provided power supply.

USB 3.0 ports

For connection of external hard drives, flash drives, USB web cameras,
USB microphones or control interfaces, see

AFU or copy to USB

HDMI output port

See

Video output ports

for details.

RJ-45 Ethernet

Auto-sensing gigabit Ethernet 10/100/1000 Base-T network port and
support for NDI and NDI|HX (Tx/Rx). See

Configure network settings

for setup instructions.

Summary of Contents for Pearl Mini
































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands

epiphan Pearl Mini, User Manual

Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands