epiphan Pearl Mini User Manual Download Page 377

Page: 377 / 447

Pearl Mini User Guide

Manage the AFU queue

The upload queue can display only 15 files at one time. Additional content is still stored and
is viewed in increments of five files when you select

Newer 5

Delete content in the AFU queue

Files can be deleted from the upload queue, either individually or as a group.

To delete content from the upload queue:

1. Navigate to the bottom of the upload queue and click

Empty Queue

to delete the entire upload

queue, or click the red 'X' icon at the end of each row to remove files individually.

There is no confirmation prompt after clicking

Empty Queue

. The queue is immediately

deleted. You cannot restore the deleted queued files.

365

Summary of Contents for Pearl Mini
































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands

epiphan Pearl Mini, User Manual

Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands