epiphan Pearl Mini, User Manual

Page: 242 / 447

Pearl Mini User Guide Resize and position items using percents or pixels
For example, using percents to move a layout item with a 60% width as far to the right of the
layout area as possible, you would need to enter 40% into the left percent box to push the item
to the right. The layout item originally takes up 60% of the layout width, so this added 40% shift
pushes the item as far to the right as possible (I.e. 100% of the horizontal axis).
The right adjustment box automatically sets itself to 0% to reflect that there is more no room remaining to
maneuver the image along the horizontal axis any further. Alternatively, you could reposition the image in the
exact same way by instead setting the right percent box to 0%.
Example 2: vertical positioning using pixels
To position your layout item along the vertical axis, enter a percent or pixel value into either the top or the
bottom adjustment box to shift your layout item downward or upward, respectively.
For example, using pixels to move a layout item that is set to 756px in height to the top of the
layout while leaving a small margin of background (say 25px), you could either enter "25px" into
the top percent box (to specify the small margin from the top down) or enter 27% into the
bottom percent box (to specify a 27% margin from the bottom up – added to the item's 70%
height this leaves a 3% margin above your layout item.)
230