epiphan Pearl Mini User Manual Download Page 3

Page: 3 / 447

iii

Thank you for choosing Epiphan!

At Epiphan Video (“Epiphan”), building reliable video systems with pro features that perform above your
expectations is our mission.

We value your feedback! Email us your suggestions and let us know how you think we're doing and where
you'd like to see our products improve:

[email protected]

Warranty

All Epiphan Systems products are provided with a 100% return to depot warranty for one year from the date
of purchase.

Technical support

Epiphan’s products are backed by our professional support team. You can reach our team several ways:

[email protected]

Live chat from our support site

https://www.epiphan.com/support/

Phone toll free at 1-877-599-6581 or call +1-613-599-6581

Gather as much information about your problem as you can before you contact us so we can help you better,
including:

A description of the problem

Details about your video or audio source (type, connection, resolution, refresh rate, etc.)

Product serial number

Product firmware version (using the admin interface)

Product LED lights

Summary of Contents for Pearl Mini
































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands

epiphan Pearl Mini, User Manual

Search results

Summary of Contents for Pearl Mini

Reviews:

Brands by name

Popular brands