Elmo Pro v.1.403.16 User Manual Download Page 92

Page: 92 / 156

4. Click the

IP Camera Info

tab

5. In the IP Camera Info tab, the following can be changed:

• Server IP (Annexxus module/IP Camera IP address)

• Server Subnet (It is advisable not to change the default value)

• Server Gateway

• Server Title (optional)

• Server Location (optional)

Server MAC address is also displayed in this setup tab. This value cannot be changed by user.

Caution

It is advisable that only network administrat-
or makes changes to this setup tab

Click

Save IP Camera Info

to save settings

. This will save both user account

information and IP camera information.

1.3.18.6. Delete IP camera

To delete an IP camera, do the following:

1. Select desired camera in the

All Cameras

list

Click the

Remove

button

. The IP camera will be removed from the list.

Related Topics:

| Hardware Setup-Control Settings

ELMO-PRO v.1.403.16 - User Manual

IP Camera

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands