1.3.15.2. Configuring Communication Setup
To configure Communication Setup, do the following:
1. Configure
Bandwidth
. This menu controls the bandwidth of the data transferred over the network. Choose
No
Limit
to use all the available connection speed to transfer data. If
No Limit
is chosen, the Server might be
slowed down in cases where multiple users are dialing into the system at the same time.
2. Enter Text Overlay Port number. The default port number is
6111
for text overlay via TCP/IP. Enter
5111
to
display text through the COM port. The user must restart the server to apply changes to Text Overlay Port.
Important
This feature is not available on ELMO-PRO
Remote.
3. Click
Other Ports
to display all ports used in the ELMO-PRO Server application. It is recommended to keep the
default port numbers, especially the Main Control Port, which is required to be the same in both remote and server
for remote connection to be possible. Unless a port designated as a default is required for another application, do not
to change the port numbers.
75
ELMO-PRO v.1.403.16 - User Manual
Communication Setup
Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
