1. Select the preset in the
Presets
drop-down menu
2. Right-click inside the
Presets
field
3. Select
Delete
from the context menu. In the example below, Preset 10 will be deleted.
1.2.6.4. Programming Preset Tour(s)
Preset Tour is a sequence of selected presets that is displayed continuously until interrupted by user. The Dwell Time
determines the delay time between two consecutive presets.
To create a preset tour, do the following:
1. Program all desired presets in the PTZ mode. (See Managing PTZ Presets for more information)
2.
Click the
Preset Touring
button
. The Preset Touring Manager window will be displayed
3. Click
New
to create a new tour
4. Select the desired presets in the Tour Configuration area by checking off the corresponding check boxes
5. Enter the
Dwell Time (Sec)
value to determine the delay time between two consecutive presets. In the example
above, the Preset Tour 1 will cause the PTZ camera to switch between Preset 1 and Preset 2 every 5 seconds.
6. Click
Save
to save configured preset tour
7. To create additional Preset Tours, repeat steps
3-6
To stop touring, do the following:
1.
Click the
Preset Touring
button
. The Preset Touring Manager window will be displayed
2. In the
Tours
drop-down menu select the empty position
24
ELMO-PRO v.1.403.16 - User Manual
PTZ mode
Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
