Elmo Pro v.1.403.16 User Manual Download Page 148

Page: 148 / 156

This section displays the following:

• User Name (User currently logged into the Local Computer)

• Local Computer Name

• MAC Address of the Local Computer

• CPU Model of the Local Computer

• Windows operating system version installed on the Local Computer

• Service Pack version installed on the Local Computer

• List of drives/partitions of the Local Computer

• Total and free memory (RAM) information of the Local Computer

2.6.1.1. Language

Two languages are currently supported on the ELMO-PRO Remote: English and French.

To change system language, select

English

Français

from the System Language drop-down menu. This will

translate the ELMO-PRO Remote interface into the appropriate language.

Click the

Save

button

to save the configured settings

144

ELMO-PRO v.1.403.16 - User Manual

Remote Info Setup

Chapter 2. ELMO-PRO Remote

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands