1.3.5.3. Setup For All Channels
To configure all channels, do the following:
1. Choose the
Color Of All Motion Areas On Live Mode
between Green and Red depending on per-
sonal esthetical preferences. When the motion is detected on a specific camera, the triggered motion detection zone
will be highlighted on the main screen in the chosen color.
2. Check the
Display Motion Area On Live Mode
checkbox to display the motion detection area outline
on Live Mode when the motion is detected.
3. Click
Area Draw
to select the entire screen on all channels for motion detection
4. Click
Area Clear
to clear all selected zones on all channels. This will disable motion detection.
5.
Click the
Save
button
to save the configured settings
1.3.5.4. Rotate Screen
The Rotate Screen dwell time specifies the delay time for channel rotation on the main screen. Set
Dwell Time
(1
to 30 seconds).
Click the
Save
button
to save the configured settings
When the main screen is set to 4 channel division and the
Rotate
button
is clicked, available channels will rotate
according to the dwell time specified. In this example, the quad screen will display the next 4 channels every 5 seconds.
Related Topics:
Hardware Setup-Channel Settings | Hardware Setup-Sensor Settings | Schedule Setup | Video
Setup
36
ELMO-PRO v.1.403.16 - User Manual
Motion Setup
Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
