Elmo Pro v.1.403.16 User Manual Download Page 44

Page: 44 / 156

5. Enable or disable

Search

and/or

Backup

for the selected user. By default, the Search and Backup for all channels

are disabled.

To enable backup and search for all channels, check the

Search : Enable

checkbox.

To enable backup and/or search for individual channels, click the plus sign next to

Search : Enable

entry.

To enable the Backup window, check the

Backup data : Enable

checkbox . When disabled, new backup

sessions can be created, but cannot be accessed/completed by the user.

To enable search on all video channels, check the

Channels : Enable

checkbox.

To display the list of all available video channels, click the plus sign next to

Channels : Enable

entry. Checkmark

the channels that will be available for search. The disabled channels (no checkmark) will not be available for search
in the Search mode (see image below).

6. Enable or disable access to the ELMO-PRO Setup for the selected user. By default, the user has no access to the

ELMO-PRO Setup tabs.

To enable access to all setup tabs, check the

Setup : Enable

checkbox.

ELMO-PRO v.1.403.16 - User Manual

User Management Setup

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands