Elmo Pro v.1.403.16 User Manual Download Page 42

Page: 42 / 156

4. Certain functions can be

Enabled

Disabled

. E.g. Live mode.

5. Some functions can be set to

Modify

(can be modified),

View

(cannot be modified) or

Disable

(hidden). E.g.

Setup tabs.

6. PTZ channels can be set to

PTZ

(enable PTZ capabilities),

View

(view only, disable PTZ capabilities) or

Disable

(hidden). E.g. Channels : PTZ

1.3.6.2. Auto Logout

The auto logout is configured for all users. Choose between the following options: 5, 10, 15, 30, or 60 minutes. If the

Time out for auto logout

is checked and the logout time is configured, the users will be automatically logged

out after the specified period of time.

1.3.6.3. Creating new user accounts

In order to create a new user account, do the following:

Click the

Add

button.

A dialog will be displayed in the right pane for inputting new user information.

ELMO-PRO v.1.403.16 - User Manual

User Management Setup

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands