Elmo Pro v.1.403.16 User Manual Download Page 21

Page: 21 / 156

The following recording schedule indicators are available:

Continuous Recording

Motion Recording

Sensor Recording

Motion Recording

Cont Audio Recording

Audio Recording

Sensor/ Audio Recording

1.2.5.2. Drag-and-Drop feature on Mux display

Mux display allows the user to drag-and-drop the video channels from the Tree View list directly onto the Main Screen
division.

In order to drag-and-drop the channel onto the main screen division, do the follow-
ing:

1. Ensure that the Tree View is selected from the View menu

2. Select desired screen division by clicking on one of the screen division buttons

3. Expand the Channels list in the Tree View and click on the desired channel to select it

ELMO-PRO v.1.403.16 - User Manual

Real-time Display vs Mux Display

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands