Note
Only channels enabled in the Hardware
Setup are displayed.
b. Drag and drop the desired channel icon onto the E-Map bitmap image in the drawing area. The channel icon will
be added onto the image.
c. Click on the
Sensor
icon to display all available sensor icons:
. The icons represent Fire, Laser and
Heat sensors respectively.
Note
Only sensors enabled in the Hardware Setup
are displayed.
d. Drag and drop the desired sensor icon onto the E-Map bitmap image in the drawing area. The sensor icon will be
added onto the image.
e. Click on the
Control
icon to display all available control icons:
. The icons represent Light and Alarm
controls respectively.
Note
Only controls enabled in the Hardware Setup
are displayed.
f. Drag and drop the desired control icon onto the E-Map bitmap image in the drawing area. The control icon will
be added onto the image.
5.
Click the
Save
button
to save the configured settings
Tip
Any one specific channel/control/sensor can
only be used once
1.3.12.3. Delete the Channels/Controls/Sensors from an
Emap
To delete Channels/Controls/Sensors, do the following:
1. Click on the
Channel, Control, Sensor
icon in the E-Map image.
2. Drag and drop the channel, control or sensor icon from the image back to the list of channels, controls, sensors on
the right .The icon will disappear from the image.
1.3.12.4. Delete the E-Map bitmap image, do the follow-
ing
To delete/change the E-Map bitmap image, do the following:
1. Select the tab with the desired E-Map in the drawing area.
2.
Click
Delete
or click the delete icon
. The following message will appear:
3. Click
Yes
to delete or
No
to return to the E-Map setup.
66
ELMO-PRO v.1.403.16 - User Manual
E-Map Setup
Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
