Elmo Pro v.1.403.16 User Manual Download Page 85

Page: 85 / 156

4. 640X480 (max. 1 video input per IP module; max. 30 fps per input)

The number of IP cameras that can be added to ELMO-PRO Server will vary depending on SPK Key. If no SPK Key is
present, no IP cameras may be added to IP Camera setup.

1.3.18.2. Add IP Camera

Use the instructions below when the IP address of the Annexxus module/IP camera is known and/or when the Annexxus
module/IP camera is located on WAN.

To add IP camera, do the following:

Click the

Add

button

2. The following will be displayed in the Selected Camera Info frame:

ELMO-PRO v.1.403.16 - User Manual

IP Camera

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands