Elmo Pro v.1.403.16 User Manual Download Page 55

Page: 55 / 156

• Computer Name (configured by manufacturer)

• MAC address

• CPU Model

• Windows operating system version

• Total and free memory information

• List of drives/partitions

• Total and free space information

• Total and free memory (RAM) information

1.3.8.3. Language

Two languages are currently supported on the ELMO-PRO Server: English and French.

To change system language, select

English

Français

from the System Language drop-down menu. This will

translate the ELMO-PRO Server interface into the appropriate language.

Click the

Save

button

to save the configured settings

Related Topics:

Main Screen | Search Window

1.3.9. Video Setup

1.3.9.1. Overview

Video Setup allows configuring brightness, hue, contrast and display mode (color/ monochrome) for each video input.
The settings are applied based on camera (physical BNC connector number), not based on channel.

ELMO-PRO v.1.403.16 - User Manual

Video Setup

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Brands by name

Popular brands