Elmo Pro v.1.403.16 User Manual Download Page 137

Page: 137 / 156

Tip

The authenticity of each saved snapshot can
be verified with Watermark Tool. Please see
the Watermark Tool section for more inform-
ation.

1.5.5. Scheduled Backup

Scheduled backup allows creating a schedule for a video recording.

1. Go to

Tools -> Scheduled Backup

menu.

Scheduled Backup

window will be displayed.

Click the

Add

button

to created a new scheduled backup session.

Schedule Job

window will be

displayed.

3. In the

Recording Settings

tab, select the backup type in the Video Format frame between

AVI

and

ELMO

Compression

. If scheduling AVI backup, click Setting for mode AVI codec settings.

4. For AVI backup file, configure

AVI Embedded Text Settings

tab

5. In the

Recording Settings

tab, select channel(s) for scheduled backup. Only selected channels will be backed

up.

6. In the

Recording Settings

tab, select the destination for the scheduled backup.

7. In the Schedule Settings tab, select the

Schedule Interval

Once

It will backup the data only once at the time selected on the Start Date, Start Time and for the Duration specified.
(H:M)

Day

133

ELMO-PRO v.1.403.16 - User Manual

Scheduled Backup

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands